TWO
ASSIGNMENTS WITH THE RIGGED BALL
Objective: Learn how to animate with the new rigged ball!
It has two controls for the animation:
It has two controls for the animation:
1. The arrows are used to translate or rotate the
ball.
2. The ring by the center of the ball is used
to squash and stretch the ball
To
deform the ball, select the ring, and select the “squash-stretch” channel in
the channel box.
Then
press and hold the mid button of your mouse over the view window, and move it slightly
side to side. You will see that the ball will change shapes. You can also
choose the “squash and stretch” and enter a number. Usually you will need
values between 1 and -1.
Assignment
One: Bouncing ball in place
Start
with the ball in the highest position, off screen. Ball will enter the screen and bounce several
times in place, losing height after each bounce until it stops.
Frame length should be between 80-160 frames long.
Your playblast should be clean
(no grid etc showing, only the ball, the BG and the floor).
INSTRUCTIONS:
1. Set up your
scene: Create a camera. Then create
ground plane and background plane,
and apply color to both.
2. Follow your
planning for the Bouncing Ball Part 1
assignment, and start by creating the animation of the Y-translation only. Tweak
the spacing of the ball by editing the tangents of your main keyframes. Use
techniques such as breaking the tangents and freeing the tangent weights to get
the best results. Do not use squash and stretch yet!
3. When you are
happy with the translation and the spacing, add squash and stretch:
a. First add the
SQUASH at the contact position.
When you are happy with the amount of squash, set a key frame in all channels or the squash and stretch control.
When you are happy with the amount of squash, set a key frame in all channels or the squash and stretch control.
b. Next, you
will add a STRETCH right before the squash.
That position should also be a contact position, with the lower tip of the ball touching the floor. Create the stretch first, set a key frame, then use the arrows to reposition the ball so it's touching the floor.
That position should also be a contact position, with the lower tip of the ball touching the floor. Create the stretch first, set a key frame, then use the arrows to reposition the ball so it's touching the floor.
Please note: there will be contact positions for each bounce: one squash in the impact, one on the stretch right before it. After the squash, it's better not to have a third contact position, or else it will look like the ball is sticking to the floor. So, after the squash, the ball will spring up, and the stretch will not touch the floor.
4. When you are
happy with the stretch, you need to work on the top part of the bounce, so the
ball keeps its regular shape. Choose the parts of your animation where you want
the ball to look like a ball with no deformations at all, enter zero in all
channels of the “squash and strech” control, and set key frames on all channels
or the squash stretch control.
5. Keep doing
the same steps above for all the bounces of your animation. Remember: the
higher the bounce, the more squash and stretch we see. As the height of the
bounces decreases, we will see less and less deformation on the ball.
Assignment
Two: Bouncing ball across the screen
SAVE your Assignment One file. Create a new scene, and follow the same steps above, with the following modifications:
1. After you are
happy with the up and down translation, add the side to side movement, setting one
first key frame with the ball all the way to the right, and one last key frame
with the ball all the way to the left. You
will only need these two key frames for your X translation (front view).
Make sure the tangents for the X curve make sense in the graph editor. Think about what speed you want, and edit the graph editor accordingly.
Make sure the tangents for the X curve make sense in the graph editor. Think about what speed you want, and edit the graph editor accordingly.
2. After you
have the ball bouncing across the screen, add the squash and stretch. Follow
the same steps you followed for the bouncing ball in place.
3. When you are
happy with the stretch and squash, you will need to lean the ball sideways on
the stretch positions, so the ball in angled in the direction of the movement.
You will need to rotate BOTH the squash and stretch control and the arrows in
order to have a proper rotation. Make sure that your stretch positions follow
the angle of the movement!
The frame range for the ball across the screen is the same as it
is for the ball bouncing in place:
Minimum of 80 frames and maximum of 160 frames.
Before
shooting your final playblast, make sure you clean the view window (no grids,
numbers and other artifacts should be visible on your playblast.)
No comments:
Post a Comment